MacBook Trackpad Repair in Dubai
MacBook trackpad repair fixes a Force Touch trackpad that no longer clicks, clicks on its own, ignores your finger or feels raised. We check first for a swollen battery, the most common cause, during a free diagnosis, then replace the trackpad or its cable with a Genuine Apple or OEM part if needed. Message us on WhatsApp or use the booking form.
- Price
- from AED 149
- Diagnosis
- Free
- Parts
- Genuine AppleOEM
Symptoms
Signs you need this repair
- The trackpad stopped clicking and feels solid
- It clicks by itself or drags windows I did not touch
- The cursor jumps or freezes while I am scrolling
- The trackpad sits higher than the case on one side
- Force Click and haptic feedback stopped working
- Gestures like two-finger scroll work only some of the time
Prices
MacBook trackpad repair prices
from AED 149
The exact price depends on your exact model and the part grade you choose. Send us your model on WhatsApp and we'll reply with the price before any work starts. Diagnosis is free.
Included
What's included
- Free diagnosis, including a check for battery swelling under the trackpad
- Trackpad or trackpad cable replacement as needed
- Your choice of Genuine Apple or OEM trackpad where both are available
- Test of click, Force Click, haptic feedback and multi-touch gestures
Not included
- Battery replacement if a swollen battery is the cause (quoted separately)
- Logic board repair if the trackpad controller on the board has failed
Process
How the repair works
- 01
Free diagnosis
We check the trackpad settings, test it in macOS Recovery to rule out software, and open the bottom case to look at the battery and cable.
- 02
Find the cause
Swollen battery, damaged cable, liquid or a failed trackpad. We explain what we found and confirm the price on WhatsApp.
- 03
Repair
Replace the battery, cable or trackpad, depending on the cause.
- 04
Test
Click across the whole surface, Force Click, haptics, gestures and palm rejection while typing.
How the MacBook trackpad works
Every MacBook Air and MacBook Pro from 2016 onward uses a Force Touch trackpad. The glass surface does not actually move down like an old hinged trackpad. Pressure sensors under it measure how hard you press, and a small motor called the Taptic Engine gives the click you feel. That is why a Force Touch trackpad feels the same to click anywhere on its surface, and why it cannot click at all when the Mac is switched off.
Because the click is generated electronically, a trackpad that feels dead can be a sensor or motor fault, a cable fault, a software setting or something pressing on it from underneath. The diagnosis separates these.
The most common cause: a swollen battery
The battery cells sit directly under the trackpad. When a cell swells, it pushes the trackpad up from beneath. The trackpad then has no room to register a press, so it stops clicking, or it is held half-pressed and clicks on its own. A raised edge or a case that rocks on a flat desk are strong signs.
If your trackpad has suddenly gone stiff, stop charging the Mac and check the bottom case for bulging. A swollen battery should be replaced, not used. See our guide to a swollen MacBook battery.
In many cases the trackpad works normally once the battery is replaced, so the fix is a battery replacement and no trackpad part at all. If the pressure has bent the trackpad or cracked its glass, we tell you after diagnosis.
Check these settings first
Before booking, a few settings in System Settings › Trackpad can explain behaviour that looks like a hardware fault:
- Tap to click: if it is on, light touches register as clicks, which can look like ghost clicking.
- Force Click and haptic feedback: if this is off, pressing harder does nothing extra.
- Click pressure: set to Light, Medium or Firm. A Firm setting can feel like a stiff trackpad.
- Accessibility › Pointer Control: check that Ignore built-in trackpad when mouse or wireless trackpad is present is not turned on with a mouse connected.
If the trackpad behaves differently in a new user account, the cause is likely software and our software repair page may help more.
Other causes we find
Damaged trackpad cable
The trackpad connects to the logic board with a thin flex cable. A cable that was folded during a previous repair, or corroded by liquid, can make the cursor freeze, jump or vanish. Replacing the cable is a smaller job than replacing the trackpad.
Liquid under the trackpad
A spill on the palm rest often runs under the trackpad. Sticky residue can stop it clicking, and corrosion on the connector can stop it tracking. Liquid rarely stops at the trackpad, so we also check the board. See water damage repair.
Failed sensor or Taptic Engine
If the battery is flat, the cable is good and the settings are right, but there is still no click or haptic response, the trackpad unit itself has failed. On MacBooks the pressure sensors and Taptic Engine are part of the trackpad assembly, so the assembly is replaced as one part.
Ask on WhatsApp for the price for your model, or see pricing.
Parts
Genuine Apple or OEM: your choice
- Genuine Apple
- An original part made by Apple.
- OEM
- A part made to the same specification by a third-party manufacturer, not Apple-branded.
We tell you which grade is fitted before the repair.
Options
How to get it to us
- Walk-in at Dubai Sports City
- Free pickup and delivery in Dubai
- Mail-in from other emirates
FAQ
MacBook trackpad repair questions
Why has my MacBook trackpad stopped clicking?
The most common cause is a swollen battery. The cells sit right under the trackpad, and when one swells it pushes the trackpad up so it cannot register a press. Other causes are liquid residue, a damaged cable, a failed trackpad or a setting such as Click pressure in System Settings › Trackpad. If the trackpad went stiff suddenly, stop charging the Mac and message us.
Why does my MacBook trackpad not click when the Mac is off?
That is normal. MacBooks from 2016 onward use a Force Touch trackpad, which does not physically move down. Pressure sensors detect your press and the Taptic Engine produces the click you feel, and both need power. When the Mac is shut down, the trackpad feels solid. If it also feels solid while the Mac is on and awake, that points to a fault.
Is it safe to keep using a MacBook with a swollen battery?
No. A swollen lithium-polymer battery is damaged and can overheat if it is pressed, bent or punctured. Stop using and charging the Mac, keep it somewhere cool and do not try to press the case closed or open it yourself. Signs include a trackpad that will not click, a bottom case that bulges or a Mac that rocks on a flat desk. Message us on WhatsApp to arrange a replacement.
What is the difference between Genuine Apple and OEM parts?
A Genuine Apple part is the part Apple itself fits to your model. An OEM part is a compatible part made to the same size, connector and specification by another manufacturer. OEM parts cost less, but for some parts, such as displays, they can differ slightly in brightness, colour or features like True Tone. We tell you which grades are available for your model, and how they differ, before you choose.
Related
