Skip to content
My Repair Store

MacBook Charging Repair in Dubai

MacBook charging repair covers USB-C and MagSafe 3 ports, chargers and cables that have stopped working, and the charging circuit on the logic board. We start with a free diagnosis to find out whether the fault is the adapter, the port, the battery or the board. Book on WhatsApp or through the booking form and we confirm your slot by WhatsApp.

Price
from AED 99
Diagnosis
Free
Parts
Genuine AppleOEM

Symptoms

Signs you need this repair

  • The battery icon says "Not Charging" even though the charger is plugged in
  • The MagSafe 3 light stays off, or flashes amber
  • It only charges if I hold the cable at an angle
  • One USB-C port charges and the other does nothing
  • Charging stops and starts every few seconds
  • The Mac is completely dead and does not react to the charger
  • System Information shows no AC charger connected

Prices

MacBook charging repair prices

from AED 99

The exact price depends on your exact model and the part grade you choose. Send us your model on WhatsApp and we'll reply with the price before any work starts. Diagnosis is free.

Included

What's included

  • Free diagnosis with a USB-C power meter on your own charger and cable
  • Testing each port for power, data and display output
  • Cleaning debris out of the port before anything is replaced
  • Port or charging board replacement where the model allows it
  • Charge test across several cycles before the Mac is returned

Not included

  • A replacement charger or cable, unless you ask us to supply one
  • Battery replacement, which is quoted separately if the battery is the cause
  • Logic board repair beyond the charging circuit, quoted after diagnosis

Process

How the repair works

  1. 01

    Check the charger and cable

    We measure what your adapter and cable actually deliver before opening the Mac.

  2. 02

    Test every port

    Each USB-C or MagSafe port is checked for power negotiation, so we know which side of the fault we are on.

  3. 03

    Open and inspect

    We look for bent pins, corrosion, debris and heat damage on the port and the board around it.

  4. 04

    Quote before repair

    You get the diagnosis and the price on WhatsApp. Nothing is replaced until you agree.

  5. 05

    Repair and charge test

    We fit the part or repair the circuit, then charge and discharge the Mac to confirm it holds.

Why a MacBook stops charging

A MacBook that will not charge usually has one of four problems: the adapter or cable, the port, the battery, or the charging circuit on the logic board. They look the same from the outside, so we test them in that order, cheapest first. Many "broken port" Macs turn out to have a worn cable or a 30W phone charger that cannot keep up with a MacBook Pro.

Before you book, check two things at home. First, open System Settings › Battery. If it says the battery is on hold or "Not Charging" while the battery is above 80%, that is usually Optimised Battery Charging doing its job, not a fault. Second, open System Information (hold Option and choose Apple menu › System Information), then Power. Under AC Charger Information you can see whether the Mac detects a charger and its wattage. Our guide to a MacBook not charging walks through more checks.

USB-C, MagSafe 3 and older MagSafe ports

Charging ports by MacBook generation
ModelsCharging portWhat usually fails
MacBook Air and MacBook Pro up to about 2017 (non-USB-C)MagSafe 1 or MagSafe 2Frayed adapter cable, worn DC-in board
12-inch MacBook, MacBook Pro 2016–2020, MacBook Air 2018–2020 and M1USB-C / Thunderbolt onlyLoose or damaged port, USB-C power controller on the board
MacBook Pro 14 and 16-inch (2021 onwards), MacBook Air M2 and laterMagSafe 3 plus USB-C / ThunderboltDirt or debris in the MagSafe connector, damaged cable, port board

On most MacBooks the USB-C ports are not the same as the charging circuit. A port can be physically fine while the chip that negotiates power with the charger has failed, often after a cheap charger, a power surge or liquid. That is why we test each port separately. If one port charges and another does not, the fault is usually on that side of the board or in that port, not the battery.

MagSafe 3 lights

The MagSafe 3 connector shows amber while charging and green when full. If the light stays off, try the cable in another wall socket and clean the connector and the port with a dry, soft brush, because the magnet picks up metal dust. A light that flashes amber points to a problem with the cable, the port or the Mac, and is worth bringing in.

When it is the battery, not the port

A worn or failed battery can stop charging even with a perfect port. If System Settings › Battery › Battery Health shows "Service Recommended", or the Mac only runs while plugged in, a battery replacement may be the real fix. A swollen battery that lifts the trackpad or the bottom case needs attention straight away.

When it is the logic board

If the Mac draws no power from any port with a known-good charger, the fault is often on the board: a shorted component on the power rail, a failed USB-C controller, or corrosion from a spill. This is board-level work. We tell you after diagnosis whether it is a charging-circuit repair or a wider logic board repair, and if liquid is involved we follow our water damage process.

Habits that protect the charging port

  • Use a charger at least as powerful as the one Apple shipped with your model. A low-wattage charger may charge slowly or not at all under load.
  • Pull the plug straight out, not sideways. Most USB-C port damage comes from cables yanked at an angle.
  • Do not charge with a cable that is frayed at the ends or gets hot.
  • Keep the ports clear of sand and dust, especially if the Mac travels in a bag to the beach or the desert.

Prices depend on the model and on whether the fix is a port, a cable or the board. See pricing or ask us on WhatsApp after the free diagnosis.

Parts

Genuine Apple or OEM: your choice

Genuine Apple
An original part made by Apple.
OEM
A part made to the same specification by a third-party manufacturer, not Apple-branded.

We tell you which grade is fitted before the repair.

Options

How to get it to us

  • Walk-in at Dubai Sports City
  • Free pickup and delivery in Dubai
  • Mail-in from other emirates

How each option works

FAQ

MacBook charging repair questions

Can I charge my MacBook with any USB-C charger?

Most USB-C Power Delivery chargers will charge a USB-C MacBook, but wattage matters. A 20W or 30W phone charger may charge a MacBook Air slowly and may not keep up with a MacBook Pro under load, so the battery drains even while plugged in. For normal charging, use a charger at least as powerful as the one Apple supplied with your model, and a cable rated for that wattage.

Why does my MacBook say "Not Charging" when it is plugged in?

Often it is not a fault. With Optimised Battery Charging turned on, macOS can pause charging at 80% when it expects you to stay plugged in, and the battery may show as on hold. It can also pause charging when the battery is too hot. If it says Not Charging at a low percentage, with a known-good charger, after a restart, the port, battery or charging circuit needs checking.

How do I know if it is the charging port or the logic board?

Try every port with a charger and cable you know work. If one port charges and another does not, that port or its side of the board is the likely cause. If no port charges, and System Information › Power shows no charger connected, the fault is more likely on the board or the battery. We confirm which during the free diagnosis by measuring what each port draws.

What do the MagSafe 3 light colours mean?

On MacBook models with MagSafe 3, the light on the connector shows amber while the battery is charging and green when it is fully charged. If there is no light, try a different wall socket and clean the connector and the port with a soft, dry brush, because the magnet attracts metal dust. A flashing amber light suggests a problem with the cable, the port or the Mac.

Related