Skip to content
My Repair Store

MacBook Logic Board Repair in Dubai

MacBook logic board repair fixes Macs that will not turn on, will not charge, show no picture or restart with kernel panics, by repairing the faulty component on the board instead of replacing the whole board where possible. Every board job starts with a free diagnosis so you know what failed before you decide. Message us on WhatsApp or use the booking form.

Price
from AED 299
Diagnosis
Free

Symptoms

Signs you need this repair

  • The Mac is completely dead, no light, no sound, no fans
  • It charges but never shows anything on screen
  • It restarts by itself and says your computer restarted because of a problem
  • The charger light or icon appears, but the Mac will not start
  • It gets hot with the lid shut and the battery drains overnight
  • USB-C ports stopped working one after another
  • It shows a circle with a line through it or a folder with a question mark at start-up

Prices

MacBook logic board repair prices

from AED 299

The exact price depends on your exact model. Send us your model on WhatsApp and we'll reply with the price before any work starts. Diagnosis is free.

Included

What's included

  • Free diagnosis with power readings and board inspection
  • Component-level repair where the fault and your model allow it
  • A clear explanation of what failed and what we propose before any work
  • Full function test after repair: power, charging, display, ports, keyboard, audio and Wi-Fi

Not included

  • Data recovery from a board that cannot be repaired (see data recovery)
  • Replacement of parts damaged by the same fault elsewhere in the Mac, unless you approve them

Process

How the repair works

  1. 01

    Free diagnosis

    We read the current the board draws from a USB-C power meter, check the power rails and inspect the board under a microscope.

  2. 02

    Find the failed component

    Short circuits, failed chips, burnt connectors or corrosion. We explain what we found and what repair is possible.

  3. 03

    Approve the repair

    We send the price on WhatsApp. Nothing is done until you agree.

  4. 04

    Board repair

    The faulty component is replaced or the damaged area is repaired, then the board is cleaned.

  5. 05

    Test

    We run the Mac through start-up, charging, display, ports and a stress test before hand-back.

What the logic board does

The logic board is the main circuit board in your MacBook. On Apple silicon models it carries the M-series chip, which contains the processor, graphics and memory in one package. On Intel models from 2018 it carries the Intel processor and the separate T2 security chip. On every MacBook Air and MacBook Pro with a T2 chip or Apple silicon, the SSD storage is also soldered to this board. A fault anywhere on it can stop the Mac from starting.

Board repair or board replacement

When a logic board fails, the usual cause is one small part: a shorted capacitor, a failed power chip, a damaged USB-C port controller or a burnt connector. Replacing the whole board fixes the Mac, but on T2 and Apple silicon models the storage goes with the old board, so your files go with it. Repairing the faulty component keeps the original board and the data on it.

Component repair compared with a new board
Component-level repairWhole board replacement
Your dataStays on the original storageLost on T2 and Apple silicon models unless backed up
What changesOnly the failed partThe whole board, including chip and storage
Possible whenThe fault is a component we can reach and replaceThe chip itself or the board layers are damaged

Not every board can be repaired. If the M-series chip or a buried layer of the board is damaged, component repair is not possible, and we tell you that plainly rather than trying anyway.

Common logic board faults

No power

A Mac that shows no sign of life is the most common board job. A shorted component on the main power rail pulls the voltage down and the Mac refuses to start. Before booking, try a different USB-C cable and charger, and an SMC reset on Intel models. Our guide to a MacBook that won't turn on lists the checks.

Charging and USB-C faults

Each USB-C port on a MacBook is managed by a controller chip on the board. Plugging in a faulty cable or a cheap hub can damage one, which then stops that port, or all of them, from charging. Our charging repair page covers port problems in more detail.

Kernel panics and restarts

A Mac that restarts with the message that your computer restarted because of a problem may have a hardware fault on the board, a failing SSD or simply a software problem. We read the panic report first: if it points to software, software repair is the cheaper path.

Liquid corrosion

Liquid that reaches the board leaves corrosion that keeps growing after the Mac is dry. A Mac that worked for a week after a spill and then died is usually a board corrosion job. See water damage repair.

Firmware and DFU restore

Some Apple silicon and T2 Macs stop at a black screen because the firmware is damaged, often after an update was interrupted. These Macs can sometimes be revived or restored in DFU mode using Apple Configurator on a second Mac. A revive keeps your data; a full restore erases it. We always try the revive first and ask before any restore.

If your Mac still starts, back up with Time Machine before a board repair. If it does not, tell us whether the data matters so we can plan the repair around it. See data recovery.

Options

How to get it to us

  • Walk-in at Dubai Sports City
  • Free pickup and delivery in Dubai
  • Mail-in from other emirates

How each option works

FAQ

MacBook logic board repair questions

Will I lose my data if the logic board is replaced?

On MacBooks with the T2 chip or Apple silicon, the SSD is soldered to the logic board and encrypted by that chip. If the whole board is replaced, the data on the old board cannot be moved to the new one. Repairing the faulty component on the original board is the way to keep it. If you have no backup, tell us before we start so we plan the repair around your data.

Can every dead MacBook logic board be repaired?

No. Most board faults come down to one or two failed components, such as a shorted capacitor or a damaged power chip, and these can often be replaced. If the main chip itself has failed or the inner layers of the board are damaged, component repair is not possible. The free diagnosis finds the failed part, and we tell you honestly whether a repair is realistic.

Should I back up my MacBook before a repair?

Yes, if the Mac still starts. Use Time Machine to an external drive, or make sure iCloud Drive and Photos have finished syncing. Most repairs do not touch your files, but on T2 and Apple silicon Macs the storage is soldered to the logic board and encrypted, so a board fault can put data at risk. If the Mac will not start, tell us whether the data matters before any work.

What is a DFU revive on a Mac?

DFU is a recovery mode built into Apple silicon and T2 Macs. Connected by USB-C to a second Mac running Apple Configurator, the firmware can be reinstalled without erasing your files; this is called a revive. A restore reinstalls everything and erases the Mac. A revive can fix a Mac stuck on a black screen after a failed update. We always try a revive before suggesting a restore.

Is the MacBook diagnosis really free?

Yes. We examine your MacBook, find the fault and tell you what the repair involves and what it costs, at no charge. Nothing is repaired until you approve the price on WhatsApp. If you decide not to go ahead, you can collect your Mac or arrange for it to be returned. Diagnosis does not guarantee a repair is possible, but you will know where you stand before paying anything.

Related